Use of Nanomodified Clinoptilolite as an Additions to Building Materials

Authors

  • G. P. Tsintskaladze Melikishvili Institute of Physical and Organic Chemistry of Georgia
  • V. G. Tsitsishvili Melikishvili Institute of Physical and Organic Chemistry of Georgia
  • P. E. Tskhvitaridze Zavriev Institute of Structural Mechanics and Earthquake Engineering
  • B. F. Keshelava Zavriev Institute of Structural Mechanics and Earthquake Engineering
  • G. Sh. Tatarashvili Zavriev Institute of Structural Mechanics and Earthquake Engineering
  • T. V. Sharashenidze Melikishvili Institute of Physical and Organic Chemistry of Georgia

Abstract

Natural zeolite clinoptoline from Georgian origin and its nanomodified forms have been used for modification of structures of the composite building materials. Characteristics of this zeolite have been studied by thermal analysis, IR spectroscopy, and adsorption methods. The testing results of the zeolite-containing cement have shown that introduction of zeolite (treated at high temperature) into the composition of cement improves its physical-mechanical properties and whole nanomodification of zeolite with plasticizers significantly decreases water-cement ratio improves its mechanical properties and quickens the setting time.

References

Min’ko N.I. Preparation Methods and Properties of nanoobjects. – Belgorod: Shukhov BSTU, 2005. – 105 p. (in Russian).

Korolev A.S., Khakimova E.Sh. Fine-grained concretes with nanoadditives of synthetic zeolite // Beton i zhelezobeton. – 2008. – N 6. – P 13–15 (in Russian).

Downloads

How to Cite

(1)
Tsintskaladze, G. P.; Tsitsishvili, V. G.; Tskhvitaridze, P. E.; Keshelava, B. F.; Tatarashvili, G. S.; Sharashenidze, T. V. Use of Nanomodified Clinoptilolite As an Additions to Building Materials. Him. Fiz. Tehnol. Poverhni 2010, 1, 251-253.

Issue

Vol. 1 No. 3 (2010): Chemistry, Physics and Technology of Surface / Himia, Fizika ta Tehnologia Poverhni

Section

Articles

License

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.