Effect microcellulose on physical and mechanical properties of epoxycomposites

Authors

  • S. V. Shulga Vernadsky Institute of general and inorganic chemistry of National Academy of Sciences of Ukraine
  • D. L. Starokadomsky Chuiko Institute of Surface Chemistry of National Academy of Sciences of Ukraine
  • A. M. Levina JSC «Innovation Center «Biryuch»
  • A. V. Zorina Voronezh State University
  • V. M. Ogenko Vernadsky Institute of general and inorganic chemistry of National Academy of Sciences of Ukraine

DOI:

https://doi.org/10.15407/hftp06.03.380

Keywords:

microcrystalline cellulose, filler, polyepoxide, epoxycomposites

Abstract

The effect of аdditive microcrystalline cellulose on physical and mechanical properties of epoxy-composites was investigated. The dependence of the deformation of samples and their tensile strength on the concentrations and type of fillers was discussed. Chipping epoxycomposites after their destruction was studied by light microscopy of the surface. It has been shown that additives may reduce the brittleness of MCC epoxycomposites under compressive tests, tensile strength becomes higher and reduction of shrinkage is decreased.

References

1. Starokadomsky D.L. About influence of non-modified nanosilica on physico-chemical properties of epoxy-polymer composites. Russ. J. Appl. Chem. 2008. 12: 2045. [in Russian].

2. Choi Y.Y., Lee S.H., Ryu S.H. Effect of silane functionalization of montmorillonite on epoxy/montmorillonite nanocomposite. Polym. Bull. 2009. 63: 47. https://doi.org/10.1007/s00289-009-0068-5

3. Starokadomsky D.L. About market of composites today. Kompozitnyy mir. 2009. 12: 11 [in Russian].

4. Demchenko V.L, Shtompel V.I., Vilensky V.O. About structure of composite from net polymers with oxides of Fe(III) and Al(III). Polym. J. 2009. 31(3): 235. [in Ukrainian].

5. Lepoittevina B., Pantoustiera N., Devaickenaerea M. Polymer/layered silicate nanocomposites by combined intercalative polymerisation and melt intercalation: a masterbatch process. Polymer. 2003. 44(7): 2033.https://doi.org/10.1016/S0032-3861(03)00076-4

6. Dobrotvor I., Stuhlak P., Buketov A. Optimisation of disperced filler in epoxycomposites. Phys.-Chem. Mechanics of Materials. 2009. 6: 32. [in Ukrainian].

7. Lyopo V., Struk V., Avdeychik S. About mechanism of doping nanomodifiers in polymer matrix. Plastic Masses.2007. 8: 36 [in Russian].

8. Greef N., Gorbatikh L., Godara A. et al. The effect of carbon nanotubes on the damage development in carbon/fiber epoxy composites. Carbon. 2011. 49: 4650. https://doi.org/10.1016/j.carbon.2011.06.047

9. Gao L., Chou T.W., Thostenson E.T., Zhang Z., Coulaud M. In situ sensing of impact damage in epoxy/glass fiber composites using percolating carbon nanotube networks. Carbon. 2011. 49(10): 3382.https://doi.org/10.1016/j.carbon.2011.04.003

10. Gerasin V., Antipov A., Karbuchev V. Kulichikhin V.G., Karpacheva V.G., Tal'roze R.V., Kudryavtsev Ya.V. New means to create a new polymer nanocomposites: from construction materials to hi-tec devices. Uspehi Himii.2013. 82(4): 303. [in Russian].

11. Lipatov Yu.S. Physico-chemistry of filled polymers. (Kiev: Naukova Dumka, 1991) [in Russian].

12. Roy D., Semsarilar M., Guthrie J.T., Perrier S. Cellulose modification by polymer grafting: a review. Chem. Soc. Rev. 2009. 38: 2046. doi: 10.1039/B808639G. https://doi.org/10.1039/b808639g

13. Galysh V.V., Kartel N.T., Milutin V.V. Synthezis end sorption properties of combinated cellulose-inorganic sorbents for concentration of cesium. Poverkhnost (Surface). 2013. 5(20): 135 [in Russian].

14. Filho E.S., Junior L.S., Silva M.F. et al. Surface cellulose modification with 2-aminomethylpyridine for copper, cobalt, nickel and zinc removal from aqueous solution. Materials Research. 2013. 16(1): 79.https://doi.org/10.1590/S1516-14392012005000147

15. Klemm D., Philipp B., Heinze T. Comprehensive Cellulose Chemistry. (Weinheim, Germany: Wiley-VCH, 1998).

16. Low I.M., Somers J., Kho H.S., Davies I.J., Latella B.A. Fabrication and properties of recycled cellulose fibre-reinforced epoxy composites. Composite Interfaces. 2009. 16(7–9): 659.https://doi.org/10.1163/092764409X12477417562210

17. Kuo Pei-Yu, Yan N., Sain M. Influence of cellulose nanofibers on the curing behavior of epoxy/amine systems.Eur. Polym. J. 2013. 49: 3778. https://doi.org/10.1016/j.eurpolymj.2013.08.022

Downloads

How to Cite

(1)
Shulga, S. V.; Starokadomsky, D. L.; Levina, A. M.; Zorina, A. V.; Ogenko, V. M. Effect Microcellulose on Physical and Mechanical Properties of Epoxycomposites. Him. Fiz. Tehnol. Poverhni 2017, 6, 380-387.

Issue

Vol. 6 No. 3 (2015): Chemistry, Physics and Technology of Surface / Himia, Fizika ta Tehnologia Poverhni

Section

Articles

License

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

 

Crossref
Scopus
Google Scholar
Europe PMC